Aircraft Inspections – FAA A&P Airframe Study Guide
Prepare Smart, Study Strong, Pass with Confidence

Aircraft inspections are one of the most important responsibilities in aviation maintenance. An FAA Airframe inspection is not simply a walk-around looking for obvious damage. The mechanic must determine whether the aircraft and its components conform to applicable requirements and remain in a condition for safe operation.
For the FAA A&P Airframe exam, students should understand inspection requirements, maintenance records, Airworthiness Directives, life-limited parts, special inspections, approved data, corrosion identification, and the procedures used to perform and document inspections.
The current FAA Aviation Mechanic ACS identifies this area as Airframe Subject D — Airframe Inspection.
At Volarprep.com, the goal is to understand what the mechanic is looking for, why it matters, and what must happen when a discrepancy is discovered. Study FAA A&P aircraft inspections, including annual and 100-hour inspections, maintenance records, AD compliance, life-limited parts, special inspections, and corrosion.
Why Aircraft Inspections Matter
Aircraft structures and systems are exposed to:
- Vibration
- Repeated loading
- Temperature changes
- Moisture
- Corrosion
- Wear
- Contamination
- Fatigue
- Environmental damage
- Maintenance-related damage
FAA Aircraft Inspections help identify deterioration before it develops into a condition that threatens airworthiness.
A good inspection requires more than eyesight. It requires proper preparation, adequate access, suitable lighting, appropriate inspection equipment, current maintenance data, and careful documentation.
Types of Aircraft Inspections

The inspection program applicable to an aircraft depends on its operation, certification, and applicable regulations.
A mechanic may encounter:
- Annual aircraft inspections
- 100-hour inspections
- Progressive inspections
- Continuous airworthiness inspection programs
- Manufacturer inspection programs
- Aircraft special inspections
- Other approved inspection programs
The FAA ACS specifically requires knowledge of inspection requirements under 14 CFR part 91.
Annual Inspection
Aircraft subject to an annual inspection requirement must receive that inspection within the applicable interval.
An annual aircraft inspection involves a thorough examination of the aircraft using the required scope and detail.
For FAA exam preparation, remember an important distinction:
An A&P mechanic does not automatically have authority to approve an annual inspection simply because the mechanic holds both ratings.
The appropriate inspection authorization is required when applicable.
This connects directly with FAA Mechanic Privileges and Limitations, because knowing how to perform maintenance is different from knowing who is legally authorized to approve particular work or inspections.
100-Hour Inspection
A 100-hour aircraft inspection applies to aircraft under the operating conditions specified by regulation.
The scope and detail of a 100-hour inspection are closely related to those of an annual inspection.
The FAA ACS specifically requires an Airframe applicant to demonstrate the ability to:
- Perform a portion of a 100-hour inspection
- Provide an aircraft inspection checklist for a 100-hour inspection
- Determine whether additional inspections are required
- Make the appropriate aircraft maintenance-records entry
FAA Exam Point
Do not confuse:
WHEN an inspection is required
with
WHO is authorized to approve it for return to service.
Those are separate questions.
Progressive Inspections
A progressive inspection divides the inspection workload into smaller inspection phases performed at specified intervals.
Instead of taking an aircraft out of service for one large inspection event, portions of the inspection can be completed progressively.
Progressive programs are particularly useful in operations where aircraft utilization makes extended downtime undesirable.
The important point is that a progressive inspection is a structured inspection program, not permission to randomly divide an annual inspection into convenient pieces.
Inspection Checklists

Inspection checklists help ensure that required areas are not accidentally omitted.
The checklist should be appropriate to:
- The aircraft
- The inspection being performed
- Applicable regulatory requirements
- Manufacturer instructions
- Installed equipment
The FAA ACS specifically identifies the selection and use of checklists and maintenance publications as a risk-management element.
Good Inspection Habit
Inspect systematically rather than from memory.
A mechanic who has inspected the same aircraft dozens of times can still overlook an item.
Preparing an Aircraft for Inspection
Before performing a detailed inspection, preparation may include:
- Reviewing aircraft records
- Reviewing applicable ADs
- Determining inspection status
- Reviewing previous discrepancies
- Opening access panels
- Removing inspection covers
- Cleaning areas when necessary
- Providing adequate lighting
- Positioning the aircraft safely
- Obtaining required tools and inspection equipment
The applicable Aircraft Maintenance Manual (AMM) should be consulted for aircraft-specific access, inspection, servicing, and maintenance procedures.
Aircraft Records Inspection
The physical aircraft is only part of the aircraft maintenance inspection.

The records can reveal information that cannot be determined simply by looking at the aircraft.
Records may need to establish:
- Aircraft total time
- Component times
- Inspection status
- Airworthiness Directive compliance
- Life-limited-part status
- Major repairs
- Major alterations
- Required maintenance
- Replacement intervals
- Previous discrepancies
The FAA ACS specifically requires a candidate to perform an airframe inspection that includes a records check.
Maintenance Records
Maintenance recordkeeping is an important part of aircraft airworthiness.
The FAA ACS specifically identifies maintenance recordkeeping requirements under 14 CFR part 43 as required knowledge.
A proper maintenance entry must accurately describe the work or inspection performed and contain the information required by the applicable regulations.
FAA Exam Point
If the maintenance or inspection isn’t properly documented, the job isn’t finished.
Airworthiness Directives
Airworthiness Directives (ADs) are legally enforceable rules issued to address unsafe conditions.
During an inspection, the mechanic must determine whether applicable AD requirements have been satisfied.
That may require determining:
- Whether the AD applies
- Whether compliance has occurred
- The method of compliance
- Whether the AD is recurring
- When the next action is due
The FAA ACS specifically requires both knowledge of AD compliance and the practical ability to determine compliance with a specific AD.
Recurring ADs

Some AD requirements are one-time actions.
Others are recurring.
A recurring AD might require an inspection or other action every specified:
- Flight hours
- Cycles
- Calendar interval
- Other defined interval
Finding a previous AD compliance entry does not automatically mean the aircraft is currently in compliance.
The mechanic must determine whether another action has become due.
Service Bulletins and Continued-Airworthiness Information
Manufacturers may publish:
- Service Bulletins (SBs)
- Service letters
- Instructions for Continued Airworthiness
- Other maintenance information
The legal status of these documents is not automatically identical to that of an AD.
However, they can become particularly important when incorporated into mandatory requirements or otherwise required by the aircraft’s applicable maintenance program.
The FAA ACS specifically includes compliance with service letters, service bulletins, Instructions for Continued Airworthiness, and ADs.
Life-Limited Parts
Certain aircraft components have mandatory life limits.
Limits may be expressed in:
- Flight hours
- Cycles
- Calendar time
- Other specified measures
Once the applicable life limit is reached, the part must be handled according to the governing requirements and approved maintenance data.
The FAA ACS specifically requires knowledge of identification of life-limited parts and their replacement intervals.
Important Inspection Principle

Never judge a life-limited component solely by appearance.
A component can look perfect and still have reached its life limit.
Special Inspections
Certain events can require inspections beyond normal scheduled inspections.
Examples may include aircraft subjected to:
- Hard or overweight landings
- Severe turbulence
- Lightning strikes
- Bird strikes
- Foreign-object damage
- Abnormal loads
- Ground damage
- Other unusual events
The correct inspection is determined from the applicable manufacturer instructions and approved maintenance data.
The FAA ACS specifically includes special inspections.
Visual Inspection
Visual inspection remains one of aviation maintenance’s most important inspection techniques.
A visual inspection can reveal:
- Cracks
- Corrosion
- Loose fasteners
- Missing hardware
- Leakage
- Chafing
- Deformation
- Heat damage
- Deterioration
- Improper installation
- Evidence of movement
Good visual inspection requires:
Clean Surface + Proper Access + Good Lighting + Correct Viewing Angle + Knowledge of What to Look For
Corrosion Inspection

Corrosion is specifically identified in the current Airframe Inspection ACS.
Inspect areas susceptible to:
- Moisture accumulation
- Chemical contamination
- Dissimilar-metal contact
- Battery contamination
- Exhaust deposits
- Trapped dirt and debris
- Damaged protective coatings
Finding corrosion is only the beginning.
The mechanic must determine its type, extent, allowable limits, and correct treatment or repair procedure.
For detailed corrosion-prevention and treatment information, use the applicable aircraft maintenance data and current FAA guidance.
Structural Inspection
Airframe inspections may include examining:
- Skin
- Frames
- Bulkheads
- Stringers
- Longerons
- Spars
- Ribs
- Attach fittings
- Fasteners
- Control surfaces
- Hinges
- Bearings
The technician is looking for deterioration, damage, looseness, distortion, cracking, corrosion, and other conditions affecting structural integrity.
Flight Control Inspection

Inspection of flight controls can include:
- Freedom of movement
- Correct direction
- Security
- Cable condition
- Cable tension
- Pulleys
- Fairleads
- Rod ends
- Bearings
- Hinges
- Stops
- Attachment hardware
A control system that moves is not necessarily correctly rigged or airworthy.
Seats and Seatbelts
This looks like a small subject, but the FAA specifically includes it in the Airframe Inspection practical skills.
The applicant must be able to inspect a seat and seatbelt, including TSO markings.
Inspect items such as:
- Seat attachment
- Seat tracks
- Locking mechanisms
- Structural condition
- Belt webbing
- Buckles
- Attachment fittings
- Required identification or markings
Non-Destructive Inspection
Some defects cannot be adequately evaluated using ordinary visual inspection.
Depending on the material, component, and suspected defect, an appropriate nondestructive inspection method may be required.
Methods can include:
- Liquid penetrant
- Magnetic particle
- Eddy current
- Ultrasonic
- Radiographic inspection
The correct method depends on the component, material, suspected defect, and applicable maintenance instructions.
We’ve covered these fundamentals in Inspection Concepts and Techniques.
Radiographic Inspection Safety
Radiographic inspection can expose personnel to ionizing radiation.
The current ACS specifically identifies performing radiographic inspections as an inspection-related risk-management area.
Only properly trained and authorized personnel using appropriate equipment and safety controls should conduct these inspections.
FAA-Approved Data
The FAA ACS specifically requires understanding the use of FAA-approved data during Airframe Inspection.
Mechanics must know which maintenance information is applicable to the work being performed and whether the repair, alteration, inspection, or other maintenance action requires approved or acceptable data.
Do not substitute memory or experience for required maintenance instructions.
Experience helps you recognize a problem.
Maintenance data tells you what you are permitted and required to do about it.
Inspection Discrepancies

When an inspection reveals a discrepancy, accurately identify and document the condition.
Examples include:
- Crack discovered
- Excessive wear
- Corrosion beyond limits
- Missing hardware
- Fluid leakage
- Damaged wiring
- Loose attachment
- Expired component
- Overdue inspection
- AD noncompliance
Do not minimize a discrepancy simply to make an aircraft pass an inspection.
Inspection Documentation
Inspection records must accurately reflect the results of the inspection and meet applicable regulatory requirements.
The current ACS specifically requires the applicant to enter the results of a 100-hour inspection in a maintenance record.
The documentation must match what actually occurred.
Using Manufacturer Maintenance Information
Depending upon the aircraft, inspection work may require information from:
- Aircraft Maintenance Manual (AMM)
- Structural Repair Manual (SRM)
- Wiring Diagram Manual (WDM)
- Component Maintenance Manual (CMM)
- Illustrated Parts Catalog (IPC)
- Service information
- Instructions for Continued Airworthiness
- Approved inspection programs
The mechanic must select the publication appropriate to the task.
Preparing for FAA Airframe Inspection Questions
For this FAA Airframe subject, concentrate on:
- Part 91 inspection requirements
- Part 43 maintenance records
- Annual inspections
- 100-hour inspections
- Progressive inspections
- Inspection checklists
- Aircraft-record reviews
- AD compliance
- Recurring ADs
- Life-limited parts
- Special inspections
- Service information
- FAA-approved data
- Corrosion identification
- Visual inspection
- NDI/NDT principles
- Inspection discrepancies
- Maintenance-record entries
- Seats and seatbelts
These topics closely follow the FAA’s current Airframe Inspection ACS requirements.
Study Aircraft Inspections With Volarprep.com
Aircraft inspection questions become much easier when you approach them systematically:
RECORDS → REQUIREMENTS → AIRCRAFT → DISCREPANCIES → DOCUMENTATION
Don’t simply memorize inspection intervals. Understand why the inspection is required, what must be inspected, what maintenance data applies, and how the results are documented.
Use Volarprep.com FAA A&P practice tests to reinforce Aircraft Inspections and the other FAA Airframe subjects.
The FAA currently lists FAA-H-8083-31B, Aviation Maintenance Technician Handbook—Airframe (2023), and the FAA states that many AMT knowledge-test questions are based on its AMT handbooks.
These free Volarprep.com pages are designed as reference and subject-review material. Use them alongside your FAA textbooks and handbooks for detailed technical study. Then use Volarprep.com FAA A&P practice tests to apply what you have learned to FAA-style questions, review detailed answer explanations, and identify subjects that need additional study.